Aluminum coil for power plant insulation are used to wrap on the pipes of various power plants to play the role of anti-corrosion and heat preservation. Because aluminum cladding coil for insulation has good flatness, corrosion resistance, decoration and mechanical properties, it is favored by the market. Insulation aluminum coils are widely used, and the most common applications are in power plants. The water-cooled wall of the power plant will replace the thermal insulation aluminum coil every three years or so. The thickness of the thermal insulation aluminum coil is different according to different regions, and the thickness is also different according to different needs. Normally, 0.5mm thick thermal insulation aluminum coil is used in places with high temperature. The place where the temperature is low is thicker.
In terms of materials, 1100, 1060, and 3003 aluminum coil for power plant insulation are commonly used. The price is not only cheap, but the ingredients will better protect them. The normal width of the thermal insulation aluminum jacket coil is one meter, and the thickness is based on the mechanical needs. The conventional thickness is 0.3-0.4-0.5-0.6-0.8-1.0mm. The weight of the coil is 50kg, and some generally weigh no more than 70kg for the convenience of construction. The state of the thermal insulation aluminum coil is h24 (semi-hard).
Haomei Aluminum produces and sells aluminum coil for power plant insulation and chemical plant pipelines. The aluminum cladding produced by our company are of good quality, good shape, and bright surface. After the construction is completed, they are beautiful and generous. Haomei Aluminum can produce aluminum coils according to customer requirements, which can be negative or positive, and the company’s products fully comply with national standards.